|
Error |
Messages |
| 0 |
Connection successful! |
| 2 |
The system cannot find the file specified. |
| 5(1) |
Access Denied. |
| 5(2) |
Invalid Procedure Call. |
| 6 |
Stack overflow. |
| 20 |
The system cannot find the device specified. |
| 71 |
No more connections allowed. |
| 380 |
Invalid Property Value. |
|
600 |
An operation is pending. |
| 601 |
The port handle is
invalid. |
| 602 |
The port is
already open. |
| 603 |
Caller's buffer is
too small. |
| 604 |
Wrong information
specified. |
| 605 |
Cannot set port
information. |
| 606 |
The port is not
connected. |
| 607 |
The event is
invalid. |
| 608 |
The device does not exist. |
| 609 |
The device type
does not exist. |
| 610 |
The buffer is
invalid. |
| 611 |
The route is not
available. |
| 612 |
The route is not
allocated. |
| 613 |
Invalid
compression specified. |
| 614 |
Out of buffers. |
| 615 |
The port was not
found. |
| 616 |
An asynchronous
request is pending. |
| 617 |
The port or device
is already disconnecting. |
| 618 |
The port is not
open. |
| 619 |
The port is
disconnected. |
| 620 |
There are no
endpoints. |
| 621 |
Cannot open the
phone book file. |
| 622 |
Cannot load the
phone book file. |
| 623 |
Cannot find the
phone book entry. |
| 624 |
Cannot write the
phone book file. |
| 625 |
Invalid
information found in the phone book. |
| 626 |
Cannot load a
string. |
| 627 |
Cannot find key. |
| 628 |
The port was
disconnected. |
| 629 |
The port was
disconnected by the remote machine. |
| 630 |
The port was
disconnected due to hardware failure. |
| 631 |
The port was
disconnected by the user. |
| 632 |
The structure size
is incorrect. |
| 633 |
The port is
already in use or is not configured for Remote Access dialout. |
| 634 |
Cannot register
your computer on the remote network. |
| 635 |
Unknown error. |
| 636 |
The wrong device
is attached to the port. |
| 637 |
The string could
not be converted. |
| 638 |
The request has
timed out. |
| 639 |
No asynchronous
net available. |
| 640 |
A NetBIOS error
has occurred. |
| 641 |
The server cannot
allocate NetBIOS resources needed to support the client. |
| 642 |
One of your
NetBIOS names is already registered on the remote network. |
| 643 |
A network adapter
at the server failed. |
| 644 |
You will not
receive network message popups. |
| 645 |
Internal
authentication error. |
| 646 |
The account is not
permitted to log on at this time of day. |
| 647 |
The account is
disabled. |
| 648 |
The password has
expired. |
| 649 |
The account does
not have Remote Access permission. |
| 650 |
The Remote Access
server is not responding. |
| 651 |
Your modem (or
other connecting device) has reported an error. |
| 652 |
Unrecognized
response from the device. |
| 653 |
A macro required
by the device was not found in the device .INF file section. |
| 654 |
A command or
response in the device .INF file section refers to an undefined macro |
| 655 |
The <message>
macro was not found in the device .INF file section. |
| 656 |
The <defaultoff>
macro in the device .INF file section contains an undefined macro |
| 657 |
The device .INF
file could not be opened. |
| 658 |
The device name in
the device .INF or media .INI file is too long. |
| 659 |
The media .INI
file refers to an unknown device name. |
| 660 |
The device .INF
file contains no responses for the command. |
| 661 |
The device .INF
file is missing a command. |
| 662 |
Attempted to set a
macro not listed in device .INF file section. |
| 663 |
The media .INI
file refers to an unknown device type. |
| 664 |
Cannot allocate
memory. |
| 665 |
The port is not
configured for Remote Access. |
| 666 |
Your modem (or
other connecting device) is not functioning. |
| 667 |
Cannot read the
media .INI file. |
| 668 |
The connection
dropped. |
| 669 |
The usage
parameter in the media .INI file is invalid. |
| 670 |
Cannot read the
section name from the media .INI file. |
| 671 |
Cannot read the
device type from the media .INI file. |
| 672 |
Cannot read the
device name from the media .INI file. |
| 673 |
Cannot read the
usage from the media .INI file. |
| 674 |
Cannot read the
maximum connection BPS rate from the media .INI file. |
| 675 |
Cannot read the
maximum carrier BPS rate from the media .INI file. |
| 676 |
The line is busy. |
| 677 |
A person answered
instead of a modem. |
| 678 |
There is no
answer. |
| 679 |
Cannot detect
carrier. |
| 680 |
There is no dial
tone. |
| 681 |
General error
reported by device. |
| 682 |
ERROR WRITING
SECTIONNAME |
| 683 |
ERROR WRITING
DEVICETYPE |
| 684 |
ERROR WRITING
DEVICENAME |
| 685 |
ERROR WRITING
MAXCONNECTBPS |
| 686 |
ERROR WRITING
MAXCARRIERBPS |
| 687 |
ERROR WRITING
USAGE |
| 688 |
ERROR WRITING
DEFAULTOFF |
| 689 |
ERROR READING
DEFAULTOFF |
| 690 |
ERROR EMPTY INI
FILE |
| 691 |
Access denied
because username and/or password is invalid on the domain. |
| 692 |
Hardware failure
in port or attached device. |
| 693 |
ERROR NOT BINARY
MACRO |
| 694 |
ERROR DCB NOT
FOUND |
| 695 |
ERROR STATE
MACHINES NOT STARTED |
| 696 |
ERROR STATE
MACHINES ALREADY STARTED |
| 697 |
ERROR PARTIAL
RESPONSE LOOPING |
| 698 |
A response keyname
in the device .INF file is not in the expected format. |
| 699 |
The device
response caused buffer overflow. |
| 700 |
The expanded
command in the device .INF file is too long. |
| 701 |
The device moved
to a BPS rate not supported by the COM driver. |
| 702 |
Device response
received when none expected. |
| 703 |
ERROR INTERACTIVE
MODE |
| 704 |
ERROR BAD CALLBACK
NUMBER |
| 705 |
ERROR INVALID AUTH
STATE |
| 706 |
ERROR WRITING
INITBPS |
| 707 |
X.25 diagnostic
indication. |
| 708 |
The account has
expired. |
| 709 |
Error changing
password on domain. |
| 710 |
Serial overrun
errors were detected while communicating with your modem. |
| 711 |
RasMan
initialization failure. Check the event log. |
| 712 |
Biplex port is
initializing. Wait a few seconds and redial. |
| 713 |
No active ISDN
lines are available. |
| 714 |
Not enough ISDN
channels are available to make the call. |
| 715 |
Too many errors
occurred because of poor phone line quality. |
| 716 |
The Remote Access
IP configuration is unusable. |
| 717 |
No IP addresses
are available in the static pool of Remote access IP addresses. |
| 718 |
PPP timeout. |
| 719 |
PPP terminated by
remote machine. |
| 720 |
No PPP control
protocols configured. |
| 721 |
Remote PPP peer is
not responding. |
| 722 |
The PPP packet is
invalid. |
| 723 |
The phone number,
including prefix and suffix, is too long. |
| 724 |
The IPX protocol
cannot dial-out on the port because the computer is an IPX router. |
| 725 |
The IPX protocol
cannot dial-in on the port because the IPX router is not installed. |
| 726 |
The IPX protocol
cannot be used for dial-out on more than one port at a time. |
| 727 |
Cannot access
TCPCFG.DLL. |
| 728 |
Cannot find an IP
adapter bound to Remote Access. |
| 729 |
SLIP cannot be
used unless the IP protocol is installed. |
| 730 |
Computer
registration is not complete. |
| 731 |
The protocol is
not configured. |
| 732 |
The PPP
negotiation is not converging. |
| 733 |
The PPP control
protocol for this network protocol is not available on the server. |
| 734 |
The PPP link control protocol terminated. |
| 735 |
The requested address was rejected by the
server. |
| 736 |
The remote
computer terminated the control protocol. |
| 737 |
Loopback detected. |
| 738 |
The server did not
assign an address. |
| 739 |
The remote server
cannot use the Windows NT encrypted password. |
|
740 |
The TAPI devices configured for Remote Access
failed to initialize or were not installed correctly. |
|
741 |
The local computer does not support encryption. |
|
742 |
The remote server does not support encryption. |
|
743 |
The remote server requires encryption. |
|
744 |
Cannot use the IPX net number assigned by the
remote server. Check the event log. |
|
745 |
An essential file is missing. Re-install
Dial-Up Networking |
| 746 |
An essential file failed to initialize. |
| 747 |
MAC not found. |
| 748 |
The system timed out while trying to load an
essential file. |
| 749 |
Invalid phone number. |
| 750 |
Invalid authentication attempt. |
| 751 |
The callback number contains an invalid
character. Only the following characters are allowed: 0 to 9, T, P, W,
(,), -, @, and space |
|
752 |
A syntax error was encountered while processing
a script. |
| 753 |
The connection could not be disconnected
because it was created by the multi-protocol router. |
| 754 |
The system could not find the multi-link
bundle. |
| 755 |
The system cannot perform automated dial
because this entry has a custom dialer specified. |
|
756 |
This connection is already being dialed. |
| 757 |
Remote access services could not be started
automatically. Additional information is provided in the event log. |
| 758 |
Internet connection sharing is already enabled
on the connection. |
| 760 |
An error occurred while routing capabilities
were being enabled. |
| 761 |
An error occurred while Internet connection
sharing was being enabled for the connection. |
| 763 |
Internet connection sharing cannot be enabled.
There are two or more LAN connections in addition to the connection to be
shared. |
| 764 |
No smart card reader is installed. |
| 765 |
Internet connection sharing cannot be enabled.
A LAN connection is already configured with the IP address required for
automatic IP addressing. |
| 766 |
The system could not find any certificate. |
| 767 |
Internet connection sharing cannot be enabled.
The LAN connection selected on the private network has more than one IP
address configured. Reconfigure the LAN connection with a single IP
address before enabling Internet connection sharing. |
| 768 |
The connection attempt failed because of
failure to encrypt data. |
|
769 |
The specified destination is not reachable. |
| 770 |
The remote machine rejected the connection
attempt. |
| 771 |
The connection attempt failed because the
network is busy. |
| 772 |
The remote computer's network hardware is
incompatible with the type of call requested. |
| 773 |
The connection attempt failed because the
destination number has changed. |
| 774 |
The connection attempt failed because of a
temporary failure. Try connecting again. |
| 775 |
The call was blocked by the remote computer. |
| 776 |
The call could not be connected because the
destination has invoked the Do Not Disturb feature. |
|
777 |
The connection attempt failed because the modem
(or other connecting device) on the remote computer is out of order. |
| 778 |
It was not possible to verify the identity of
the server. |
| 779 |
To dial out using this connection, you must use
a smart card. |
|
780 |
An attempted function is not valid for this
connection. |
|
781 |
The encryption attempt failed because no valid
certificate was found. |
| 782 |
Network Address Translation (NAT) is currently
installed as a routing protocol, and must be removed before enabling
Internet Connection Sharing |
| 783 |
Internet Connection Sharing cannot be enabled.
The LAN connection selected as the private network is either not present,
or is disconnected from the network. Please ensure that the LAN adapter is
connected before enabling Internet Connection Sharing |
| 784 |
You cannot dial using this connection at logon
time, because it is configured to use a user name different than the one
on the smart card. If you want to use it at logon time, you must configure
it to use the user name on the smart card |
| 785 |
You cannot dial using this connection at logon
time, because it is not configured to use a smart card. If you want to use
it at logon time, you must edit the properties of this connection so that
it uses a smart card |
| 786 |
The L2TP connection attempt failed because
there is no valid machine certificate on your computer for security
authentication |
| 787 |
The L2TP connection attempt failed because the
security layer could not authenticate the remote computer |
| 788 |
The L2TP connection attempt failed because the
security layer could not negotiate compatible parameters with the remote
computer |
| 789 |
The L2TP connection attempt failed because the
security layer encountered a processing error during initial negotiations
with the remote computer. |
| 790 |
The L2TP connection attempt failed because
certificate validation on the remote computer failed |
| 791 |
The L2TP connection attempt failed because
security policy for the connection was not found |
|
792 |
The L2TP Connection Attempt failed because
security negotiation timed out. |
| 793 |
The L2TP connection
attempt failed because an error occurred while negotiating security. |
| 794 |
The Framed Protocol
RADIUS attribute for this user is not PPP. |
| 795 |
The Tunnel Type
RADIUS attribute for this user is not correct |
| 796 |
The Service Type
RADIUS attribute for this user is neither Framed nor Callback Framed |
|
797 |
The modem could not
be found. *This error occurs only in Windows 2000 and XP. In some cases,
rebooting the machine may "solve" the problem. |
|
798 |
A certificate could not be found that can be
used with this Extensible Authentication Protocol |
|
799 |
Internet Connection Sharing (ICS) cannot be enabled due to an IP address
conflict on the network. ICS requires the host be configured to use
192.168.0.1. Please ensure that no other client on the network is
configured to use 192.168.0.1. |
|
800 |
Unable to establish the VPN connection. The VPN
server may be un-reachable, or security parameters may not be configured
properly for this connection. |
| 995 |
Operation aborted. |
| 1382 |
Maximum length exceeded. |
| 1793 |
Account expired. |
| 2250 |
Network connection does not exist. |
|
|
|
back to top |
|
|
|
» Close Window |
